Backward Building


In Neural Network, most models are solved by the backpropagation algorithm(known as BP) at present. Technically, BP calculates the gradient of the loss function, then propagates it back through the networks following the chain rule. However, when configuring the model structure, users do not need to define the backward part. So a mechanism is required by the framework which can complete the model's backward part automatically according to the given forward part.

When implementing a specific op, the developer is also asked to implement its backward version, called grad_op. A grad_op takes gradients of its corresponding op's outputs, and calculate gradients of the op's inputs. During the building of a model's backward part, the framework creates each forward op's grad_op, and then string them together in reverse order of forwarding part. In this way, gradients spread from the end to the beginning of the model, in another word, from the loss to parameters.


The motivation of backward building is apparent. However, implementation it correctly is not so easy. In the Fluid design, a deep learning model is described by Program, Block, Op and Variable. The Block itself can be nested. It means that the ops and variables are scattered across different blocks rather than all be gathered in a single graph. Our backward building algorithm shall visit blocks in recursive order and be able to insert grad_ops and new created variables into the right place.


Although the whole algorithm is comprised of many functions, only one is exposed as API:

def append_backward(loss, parameter_list=None, no_grad_set=None):
    Append backward part to main_program

        loss(Variable): The variable generated by the cost function.
        parameter_list(list): Parameters that need to be updated by optimizers.
            If None, it means all parameters need to be updated.

        no_grad_set(set): Variables that have no gradients in Block 0. 
            If None, the set will be generated inside the function and 
            contains all variables with `step_gradient=True` from all blocks.

        (list[Variable]): list of (parameters, gradients) pair.

By invoking this API, the framework appends backward part of the program where the loss is. It takes three arguments. loss means the final loss value. It must be a scalar and is usually the output of the loss layer. It is also where the gradient generated and backpropagation starts. parameter_list marks all parameters needs updating. If it's None, all parameter will be updated by optimizers. no_grad_set marks variables without gradient. if all outputs of some grad_op are in no_grad_set, the grad_op will not be run.

This API will be invoked automatically before optimizer building. As a result, in most cases, users do not need to invoke the API by themselves to append backward part.


The implementation of backward building algorithm is in file. The whole algorithm can be divided into two independent parts: creating grad_ops and creating new variables.

Creating grad_ops

The creating of grad_ops is implemented by:

def _append_backward_ops_(target,
    Create all grad ops, and insert them into given block

        target(Variable): the target variable of forward pass
        block(Block): the block where forward ops are
        target_block(Block): the block which is going to hold new generated grad ops
            key(int)  block index
            val(set) a set of varibale names. These varibales have no gradient
        grad_to_var(dict)(output argument):
            key(str): grad variable name
            val(str): corresponding forward variable name

Given a block, the function will traverses all ops in this block in reverse order, gets corresponding grad_op from the C++ core via core.get_grad_op_desc(), then append it to target_block.

However, some specific op(e.g. while_op, if_else_op) can hold its own sub-block. For these sub-blocks contains ops as well, the grad_op creating should be recursive.

During the reverse traversal, we check each op whether it has an attribute named sub_block. If so, it means there is a sub-block and we need to deal with it first. After creating a new block whose father is the one in op's attribute, we invoke _append_backward_ops_() recursively, assigning the new block to parameter target_block and the one in op's attribute to block. The pseudo-code shows this process:

******* pseudo-code ********
for op in reversed(block.ops):
    if op has an attribute named 'sub_block':
        Get the sub-block(`s_block`) from op's attribute.
        Create a new block(`grad_s_block`), whose father is `s_block`.
        Invoke _append_backward_ops_(), with `block=s_block` and `target_block=grad_s_block`

    Invoke `core.get_grad_op_desc()` to get op's grad_op.
    Insert name correspondings between variables and their gradients of the grad_op to grad_to_var
    Assign grad_s_block to grad_op as it's 'sub_block' attribute.
    Append grad_op to current target_block.

The first invoking of _append_backward_ops_() is initiated by append_backward(), in which parameters block and target_block are all assigned with root block(the block with index 0).

Corner Cases of grad_op Creating

In the previous section, we show the regular process of grad_op creating. However, in some corner cases, the conventional algorithm is not enough to get the correct result and appending handling is required. These additional processes run after the algorithm mentioned above and do some special adjusts on its output grad_ops.

Shared Variables

If a variable is read by more than one op in the forward pass, its gradient is likely to be written by more than one grad_ops in the next backward pass. To make the gradient result being the sum of all grad_ops' outputs instead of the last running one, we assign each output with a temporary variable and then add a sum_op to add them up.

For the debug convenience, if the final gradient name is w@GRAD, it's corresponding temporary variables will be named as w@GRAD@RENAME@0, w@GRAD@RENAME@1...

See function _addup_repetitive_outputs_ in for implementation details.

No Gradient Variables

In our framework, variables can be marked as no_gradient, it means that the gradient of this variable is unnecessary and can be considered as zero in model training. Apparently, when all the outputs of some grad_op are marked as no_gradient, the grad_op itself can be skipped in backward pass.

Another situation is all the gradient inputs of some grad_op are marked as no_gradient, which means all of them can be considered as zeros. For grad_ops are in essence the propagation of gradients, all the outputs are definitely zeros when all gradient inputs are zeros. Therefore the grad_op can also be skipped.

It should be noted that all these zero gradients still need to be creating and initialized by something, otherwise following grad_ops who take these gradients as inputs take the risk of using uninitialized memory. In our code, we employ fill_zeros_like_op to initialize them as all zeros.

This features are implemented in function _remove_no_grad_branch_. It checks new created grad_ops one-by-one, removes who can be skipped and inserts fill_zeros_like_op when its necessary. We can get the no_grad_set from the _append_backward_ops_ argument no_grad_dict or generate it on the fly by scanning all variables' no_gradient attribute(True or False).

Creating Backward Variables

Up to now, we have completed all creating and adjusting jobs of grad_ops. However, backward variables have not been created. Now they are only represented by grad_op's input and output arguments. The backward variable creating job will be done by:

def _append_backward_vars_(block, 
    Create new variables required by backward pass.

        block(Block): the block where new variables will be created
        start_op_idx(int): Only variables required by ops in block.ops[start_op_idx : ] will be created
            key(str): grad variable name
            val(str): corresponding forward variable name
            In most cases, this dict is generated by _append_backward_ops_()
        grad_info_map(dict)(output argument):
            key(str): forward variable name
            val(tuple): a tuple of (str, int), str is the corresponding grad name, int is the block index

Given a block, this function traverses all the grad_ops in it(The argument start_op_idx indicates where the grad_op sequence starts.) and creates all the uncreated outputs. The pseudo-code shows this process:

for op in block.ops[start_op_idx : ]:

    if op has an attribute named 'sub_block':
        Get the sub-block(`s_block`) from op's attribute.
        Invoke _append_backward_vars_(), with `block=s_block`

    for var_name in op.all_output_names():
        if block.has_var_recursive(var_name) or var_name is the name of empty variable:
        create a new variable named 'var_name' in block
        if grad_to_var.has_key(var_name):
            set grad_info_map[grad_to_var[var_name]] as a tuple of (var_name. block)

    do op's var type inference
    do op's shape inference