Design: Sequence Decoder Generating LoDTensors
In tasks such as machine translation and visual captioning, a sequence decoder is necessary to generate sequences, one word at a time.
This documentation describes how to implement the sequence decoder as an operator.
Beam Search based Decoder
The beam search algorithm is necessary when generating sequences. It is a heuristic search algorithm that explores the paths by expanding the most promising node in a limited set.
In the old version of PaddlePaddle, the C++ class
RecurrentGradientMachine implements the general sequence decoder based on beam search, due to the complexity involved, the implementation relies on a lot of special data structures that are quite trivial and hard to be customized by users.
There are a lot of heuristic tricks in the sequence generation tasks, so the flexibility of sequence decoder is very important to users.
During the refactoring of PaddlePaddle, some new concepts are proposed such as: LoDTensor and TensorArray that can better support the sequence usage, and they can also help make the implementation of beam search based sequence decoder more transparent and modular .
For example, the RNN states, candidates IDs and probabilities of beam search can be represented all as
the selected candidate's IDs in each time step can be stored in a
Packed to the sentences translated.
Changing LoD's absolute offset to relative offsets
LoDTensor is designed to store levels of variable-length sequences. It stores several arrays of integers where each represents a level.
The integers in each level represent the begin and end (not inclusive) offset of a sequence in the underlying tensor, let's call this format the absolute-offset LoD for clarity.
The absolute-offset LoD can retrieve any sequence very quickly but fails to represent empty sequences, for example, a two-level LoD is as follows
[[0, 3, 9] [0, 2, 3, 3, 3, 9]]
[0, 3)- the second's offset is
while on the second level, there are several empty sequences that both begin and end at
It is impossible to tell how many empty second-level sequences exist in the first-level sequences.
There are many scenarios that rely on empty sequence representation, for example in machine translation or visual captioning, one instance has no translation or the empty candidate set for a prefix.
So let's introduce another format of LoD, it stores the offsets of the lower level sequences and is called relative-offset LoD.
For example, to represent the same sequences of the above data
[[0, 3, 6] [0, 2, 3, 3, 3, 9]]
the first level represents that there are two sequences,
their offsets in the second-level LoD is
[0, 3) and
The second level is the same with the relative offset example because the lower level is a tensor. It is easy to find out the second sequence in the first-level LoD has two empty sequences.
The following examples are based on relative-offset LoD.
Usage in a simple machine translation model
Let's start from a simple machine translation model that is simplified from the machine translation chapter to draw a blueprint of what a sequence decoder can do and how to use it.
The model has an encoder that learns the semantic vector from a sequence, and a decoder which uses the sequence encoder to generate new sentences.
import paddle as pd dict_size = 8000 source_dict_size = dict_size target_dict_size = dict_size word_vector_dim = 128 encoder_dim = 128 decoder_dim = 128 beam_size = 5 max_length = 120 # encoder src_word_id = pd.data( name='source_language_word', type=pd.data.integer_value_sequence(source_dict_dim)) src_embedding = pd.embedding(size=source_dict_size, size=word_vector_dim) src_word_vec = pd.lookup(src_embedding, src_word_id) encoder_out_seq = pd.gru(input=src_word_vec, size=encoder_dim) encoder_ctx = pd.last_seq(encoder_out_seq) # encoder_ctx_proj is the learned semantic vector encoder_ctx_proj = pd.fc( encoder_ctx, size=decoder_dim, act=pd.activation.Tanh(), bias=None)
def generate(): decoder = pd.while_loop() with decoder.step(): decoder_mem = decoder.memory(init=encoder_ctx) # mark the memory generated_ids = decoder.memory() # TODO init to batch_size <s>s generated_scores = decoder.memory() # TODO init to batch_size 1s or 0s target_word = pd.lookup(trg_embedding, gendrated_ids) # expand encoder_ctx's batch to fit target_word's lod # for example # decoder_mem.lod is # [[0 1 3], # [0 1 3 6]] # its tensor content is [a1 a2 a3 a4 a5] # which means there are 2 sentences to translate # - the first sentence has 1 translation prefixes, the offsets are [0, 1) # - the second sentence has 2 translation prefixes, the offsets are [1, 3) and [3, 6) # the target_word.lod is # [[0, 1, 6] # [0, 2, 4, 7, 9 12]] # which means 2 sentences to translate, each has 1 and 5 prefixes # the first prefix has 2 candidates # the following has 2, 3, 2, 3 candidates # the encoder_ctx_expanded's content will be # [a1 a1 a2 a2 a3 a3 a3 a4 a4 a5 a5 a5] encoder_ctx_expanded = pd.lod_expand(encoder_ctx, target_word) decoder_input = pd.fc( act=pd.activation.Linear(), input=[target_word, encoder_ctx_expanded], size=3 * decoder_dim) gru_out, cur_mem = pd.gru_step( decoder_input, mem=decoder_mem, size=decoder_dim) scores = pd.fc( gru_out, size=trg_dic_size, bias=None, act=pd.activation.Softmax()) # K is an config topk_scores, topk_ids = pd.top_k(scores, K) topk_generated_scores = pd.add_scalar(topk_scores, generated_scores) selected_ids, selected_generation_scores = decoder.beam_search( topk_ids, topk_generated_scores) # update the states decoder_mem.update(cur_mem) # tells how to update state generated_ids.update(selected_ids) generated_scores.update(selected_generation_scores) decoder.output(selected_ids) decoder.output(selected_generation_scores) translation_ids, translation_scores = decoder()
decoder.beam_searchis an operator that, given the candidates and the scores of translations including the candidates, returns the result of the beam search algorithm.
In this way, users can customize anything on the input or output of beam search, for example:
- Make the corresponding elements in
topk_generated_scoreszero or some small values, beam_search will discard this candidate.
- Remove some specific candidate in
- Get the final
translation_ids, remove the translation sequence in it.
Both of them are two-level
- The first level represents
batch_sizeof (source) sentences.
- The second level represents the candidate ID sets for translation prefix.
For example, 3 source sentences to translate, and has 2, 3, 1 candidates.
Unlike an RNN, in sequence decoder, the previous state and the current state have different LoD and shape, and an
lod_expand operator is used to expand the LoD of the previous state to fit the current state.
For example, the previous state:
- LoD is
[0, 1, 3][0, 2, 5, 6]
- content of tensor is
a1 a2 b1 b2 b3 c1
the current state is stored in
- LoD is
[0, 2, 7][0 3 5 8 9 11 11]
- the content is
- a1 a1 a1 (a1 has 3 candidates, so the state should be copied 3 times for each candidates)
- a2 a2
- b1 b1 b1
- b3 b3
- None (c1 has 0 candidates, so c1 is dropped)
The benefit from the relative offset LoD is that the empty candidate set can be represented naturally.
The status in each time step can be stored in
Packed to a final LoDTensor. The corresponding syntax is:
selected_ids are the candidate ids for the prefixes, and will be
TensorArray to a two-level
LoDTensor, where the first level represents the source sequences and the second level represents generated sequences.
selected_scores will get a
LoDTensor that stores scores of each translation candidate.
selected_generation_scores will get a
LoDTensor, and each tail is the probability of the translation.
LoD and shape changes during decoding
According to the image above, the only phase that changes the LoD is beam search.
Beam search design
The beam search algorithm will be implemented as one method of the sequence decoder and has 3 inputs:
topk_ids, the top K candidate ids for each prefix.
topk_scores, the corresponding scores for
generated_scores, the score of the prefixes.
All of these are LoDTensors, so that the sequence affiliation is clear. Beam search will keep a beam for each prefix and select a smaller candidate set for each prefix.
It will return three variables:
selected_ids, the final candidate beam search function selected for the next step.
selected_scores, the scores for the candidates.
generated_scores, the updated scores for each prefix (with the new candidates appended).
Introducing the LoD-based
Unpack methods in
generated_scores are LoDTensors that exist at each time step,
so it is natural to store them in arrays.
Currently, PaddlePaddle has a module called
TensorArray which can store an array of tensors. It is better to store the results of beam search in a
TensorArray are used to pack tensors in the array to an
LoDTensor or split the
LoDTensor to an array of tensors.
It needs some extensions to support the packing or unpacking an array of